Triaxial Cell

This consists of stress-path triaxial cells for diameters of up to 300 mm for internal, local transducer expandable, saturated or unsaturated tests and a double wall system for high accuracy volume change.

Inquiry

Get general catalogues

Special stainless steel triaxial cells with an internal frame to connect all submersible transducers directly to the sample before the cell is closed by the cell-wall
Easy handling and sample preparation
Through ports for internal transducers (not included) for direct sample measurement, such as:
- Local radial deformation
- Local axial deformation
- Rotational displacement
- Local axial load
- Local torque
- Pore water pressure
- Unsaturated test conditions (ceramic discs)
- Bender elements wave generators
- Temperature measurement
- Temperature control

Cell-construction	Stainless steel or light alloy
Max. cell pressure	1/2/3.5/6 MPa
Sample diameters	25 mm up to 300 mm

Not available

Not available

ASTM D-2850

Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils

ASTM D-2850-03a

Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils

ASTM D-3999-91

Standard Test Method for: The Determination of the Modulus and Damping Properties of Soils Using Cyclic Triaxial Apparatus

ASTM D-4767

Standard Test Method for: Consolidated Undrained Triaxial Compression Test for Cohesive Soils.

ASTM D-5084

Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter

ASTM D-5311

Standard Test Method for: Load Controlled Cyclic Triaxial Strength of Soil.

ASTM D-7181

Test Method for Consolidated Drained Triaxial Compression Test for Soils

BS 1377-6

Methods of Test for Soils for Civil Engineering Purposes: Consolidation and Permeability Tests in Hydraulic Cells and with Pore Pressure Measurement

BS 1377-7

Methods of test for Soils for civil engineering purposes - Part 7: Shear strength tests (total stress)

BS 1377-8

Methods of test for Soils for civil engineering purposes - Part 8: Shear strength tests (effective stress)

AASHTO T-307

Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials

AASHTO T-307-99

Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials

AASHTO TP-46

Standard Test Method for Determining the Resilient Modulus of Soils and Aggregate Materials

(replaced by AASHTO T-307)

CEN ISO/TS 17892-11

Geotechnical investigation and testing — Laboratory testing of soil — Part 11: Determination of permeability by constant and falling head

CEN ISO/TS 17892-8

Geotechnical investigation and testing — Laboratory testing of soil — Part 8: Unconsolidated undrained triaxial test

CEN ISO/TS 17892-9

Geotechnical investigation and testing -- Laboratory testing of soil - Part 9: Consolidated triaxial compression tests on water-saturated soils

AS 1289.6.4.1

Soil strength and consolidation tests- Determination of compressive strength of a soil-Compressive strength of a specimen tested in undrained triaxial compression without measurement of pore water pressure.

AS 1289.6.4.2

Soil strength and consolidation tests-Determination of compressive strength of a soil-Compressive strength of a saturated specimen tested in undrained triaxial compression with measurement of pore water pressure

AS 1289.6.6.1

Soil strength and consolidation tests-Determination of the one-dimensional consolidation properties of a soil-Standard method.

JGS 0412

Test Method for one-dimensional consolidation Properties of Soils using constant rate of strain loading

JGS 0521

Method for Unconsolidated-Undrained Triaxial Compression Test on Soils

JGS 0522

Method for Consolidated-Undrained Triaxial Compression Test on Soils

JGS 0523

Method for Consolidated-Undrained Triaxial Compression Test on Soils with Pore Water Pressure Measurements

JGS 0524

Method for Consolidated-Drained Triaxial Compression Test on Soils