Stress Path Bishop & Wesley Triaxail Testing System
This high quality stress/path triaxial system is consisting basically of a Bishop & Wesley cell, three pressure/volume controller, internal submersible load cell to measure axial load, a pressure transducer to measure pore water pressure and a linear displacement transducer to measure vertical displacement.
Thanks to the integrated software and also keyboard controller (pressure/volume system), the operation of the device is very user-friendly. Exchangeable, pre-calibrated measuring sensors guarantee high accuracy over a wide measuring range.
All the tests are running under PC control like stress path, K0, slow cyclic.
Options:
- Local strain measurement
- Unsaturated testing system
- Bender element test
- An improved Bishop & Wesley triaxial samples with pedestal, top cap
- Internal submersible load cell to measure and closed-loop control of axial load
- Pressure transducer to measure pore water pressure and B-value check
- Linear displacement transducer to measure vertical displacement
- Automatic pressure/volume controller for closed-loop control of axial stress and strain
- Automatic pressure/volume controller for cell pressure control and back pressure control
- Optional advanced data acquisition system for additional transducer
- A complete PC with user friendly software enables all kinds of stress paths to control automatic pressure volume systems and to acquire all the sensors
- All devices include a serial RS232 and Ethernet port
|
Sample diameter |
Up to 101.8 mm |
|
Cell pressure |
2 MPa/10 MPa/20 MPa |
|
Max. axial load |
5 kN |
|
Max. axial load with motorized version |
25 kN |
- Not available
- ASTM D-2850
- ASTM D-2850-03a
- ASTM D-4767
- ASTM D-5084
- ASTM D-7181
- ASTM D-7181-11
- BS 1377-6
- CEN ISO/TS 17892-11
- CEN ISO/TS 17892-8
- CEN ISO/TS 17892-9
- AS 1289.6.4.1
- AS 1289.6.4.2
- AS 1289.6.6.1
- JGS 0412
- JGS 0521
- JGS 0522
- JGS 0523
- JGS 0524
Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
Standard Test Method for: Consolidated Undrained Triaxial Compression Test for Cohesive Soils.
Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
Test Method for Consolidated Drained Triaxial Compression Test for Soils
Method for Consolidated Drained Triaxial Compression Test for Soils
Methods of Test for Soils for Civil Engineering Purposes: Consolidation and Permeability Tests in Hydraulic Cells and with Pore Pressure Measurement
Geotechnical investigation and testing — Laboratory testing of soil — Part 11: Determination of permeability by constant and falling head
Geotechnical investigation and testing — Laboratory testing of soil — Part 8: Unconsolidated undrained triaxial test
Geotechnical investigation and testing -- Laboratory testing of soil - Part 9: Consolidated triaxial compression tests on water-saturated soils
Soil strength and consolidation tests- Determination of compressive strength of a soil-Compressive strength of a specimen tested in undrained triaxial compression without measurement of pore water pressure.
Soil strength and consolidation tests-Determination of compressive strength of a soil-Compressive strength of a saturated specimen tested in undrained triaxial compression with measurement of pore water pressure
Soil strength and consolidation tests-Determination of the one-dimensional consolidation properties of a soil-Standard method.
Test Method for one-dimensional consolidation Properties of Soils using constant rate of strain loading
Method for Unconsolidated-Undrained Triaxial Compression Test on Soils
Method for Consolidated-Undrained Triaxial Compression Test on Soils
Method for Consolidated-Undrained Triaxial Compression Test on Soils with Pore Water Pressure Measurements
Method for Consolidated-Drained Triaxial Compression Test on Soils
- Detailed information will follow soon
Similar Products:
